Injectable Dog Microchip for Vets & Shelters
Frequency:134.2Khz
Application:Dogs/Cats/Rabbit
Product name:Dog Chip Injection
Injectable Dog Microchip - Full Specifications
Material | Schott 8625 biocompatible bioglass with parylene anti-migration coating |
|---|---|
Dimension / Size | 1.25×7 mm | 1.4×8 mm | 2.12×12 mm (custom sizes available) |
Frequency | 134.2 kHz (LF) | 125 kHz (LF) | 13.56 MHz (HF/NFC) |
Protocol | FDX-B (ISO 11784/11785) | ISO 14443A (NFC) |
Chip Options | EM4305, Hitag S256, NTAG213/216 |
Reading Distance | 5–10 cm (LF), depending on reader and implant depth |
Data Retention | 20+ years (passive, no battery required) |
Working Temperature | −25 °C to +70 °C (body-temperature optimized) |
Sterilization | EO (ethylene oxide) sterilized, 5-year effectiveness |
Personalization | ICAR number encoding, UID programming, laser engraving available |
Implantable Bioglass Dog Microchip - Permanent ID for Procurement Teams
This injectable dog microchip delivers permanent, tamper-proof electronic identification that lasts the animal's full lifetime from a single subcutaneous implant. Each transponder is a passive FDX-B chip sealed in Schott 8625 bioglass and pre-loaded into a sterile, single-use syringe - no battery, no maintenance, no re-scan drift. The bioglass body is the same medical-grade glass class used in human implants, and the parylene anti-migration coating holds the chip in place after injection. For sourcing teams supplying veterinary networks, shelters, and breeders, one implantable dog microchip SKU covers dog, cat, and rabbit identification under one ISO 11784/11785 standard, with read performance that stays consistent across every universal scanner brand.
Wholesale Injectable Dog Microchip - Key Advantages for Project Buyers
Zero migration after injection
Universal scanner read performance
Factory-direct cost structure
Bioglass-Encapsulated Dog Microchip - Material & Anti-Migration Engineering
Each transponder is sealed in Schott 8625 biocompatible bioglass - the same implant-grade glass class used in human medical devices, rated for zero tissue rejection across a 20+ year lifespan. A parylene C coating is applied over the glass so connective tissue anchors the chip at the injection site rather than letting it drift. The capsule is EO-sterilized to a 5-year shelf effectiveness and sealed inside a single-use syringe. For your veterinary buyers, this combination means no inflammatory recalls, no re-implantation from chip migration, and a transponder that outlives the animal it identifies - the failure modes that drive warranty claims on cheaper polymer-coated chips simply do not occur here.
Shelter-Ready Injectable Dog Microchip for Veterinary & Rescue Programs
Veterinary Clinic Network
How our chip solved itStandardizing on FDX-B (ISO 11784/11785) chips delivered universal read compatibility across all existing readers, while the bioglass-plus-parylene body removed the tissue interference behind false negatives.
Animal Shelter & Rescue
How our chip solved itFactory-direct pricing with pre-loaded syringe kits cut per-implant cost by 35%, and ICAR-encoded numbering satisfied state registration databases with no added paperwork.
Custom Injectable Dog Microchip - OEM Manufacturing for Project Buyers
Bring us your ICAR manufacturer code and we encode your dedicated number block at the wafer stage - your chips register under your prefix, not a generic one. Private-label the syringe color, the blister packaging, and the multilingual instruction insert to match your brand and your destination market's language requirements. The minimum order for custom-encoded, private-label runs is 500 pcs. For a distributor building a branded pet-ID line, this means a finished, registration-ready product carrying your identity straight off our line - no separate kitting, relabeling, or repackaging step on your side.
Factory-Tested Dog Microchip - ICAR, CE & ISO 9001 Compliance
Every chip is read-tested, data-integrity checked, and physically inspected before shipment, holding the line defect rate below 0.1%. Each shipment leaves with its batch test report and certificate of conformity.
Injectable Dog Microchip Gallery
SynTek - Your Factory-Direct Dog Microchip Manufacturer & Supplier
SynTek is a dedicated dog microchip manufacturer and OEM supplier, controlling the full production chain - chip bonding, bioglass encapsulation, sterilization, and syringe loading - inside one 3,600 m² facility.
Because there is no trading company between the wafer and your purchase order, you get factory-direct pricing with complete batch traceability, and every unit is tested before it ships. From ICAR number-block encoding to private-label syringe kits, the people who build the chip are the people who fill your specification.
Injectable Dog Microchip - Procurement FAQs
Q: What read range does this injectable dog microchip support?
A: Read range is 5–10 cm at 134.2 kHz (LF), varying with scanner power and implant depth. Because the chip runs the FDX-B (ISO 11784/11785) protocol, any ICAR-compliant universal reader detects it. SynTek, as a dedicated dog microchip manufacturer, read-tests every unit before shipment.
Q: Are these dog microchips compatible with all universal pet scanners?
A: Yes. They operate on FDX-B (ISO 11784/11785) at 134.2 kHz - the format ICAR-registered readers across every brand detect. There is no proprietary lock-in, so the chips read on existing equipment without new hardware.
Q: What sizes are available, and which suits a dog?
A: Three sizes: 1.25×7 mm, 1.4×8 mm, and 2.12×12 mm, with custom sizes available. The 1.4×8 mm and 2.12×12 mm are the common choices for dogs, while 1.25×7 mm suits smaller companion animals. SynTek, as a dog microchip supplier with in-house encapsulation, can match size to your animal mix.
Q: Will the dog microchip migrate after injection?
A: No. The parylene anti-migration coating anchors the transponder to surrounding tissue within days of injection, so it stays at the implant site over the animal's lifetime - eliminating the mislocated, unreadable-chip failure that drives re-scans.
Q: Can you encode our own ICAR number block and private-label the kit?
A: Yes. SynTek, as an OEM dog microchip manufacturer, encodes your dedicated ICAR number block at the wafer stage and private-labels syringe color, packaging, and multilingual instructions. The minimum for custom runs is 500 pcs.
Q: Does this dog microchip meet pet-passport and state registration requirements?
A: Each chip ships ICAR-encoded under the ISO 11784/11785 standard recognized by EU pet-passport and national registration databases, with CE conformity and a certificate of conformity per batch. Confirm your destination registry's required number format and we encode to match.
Hot Tags: Injectable Dog Microchip for Vets & Shelters, China, manufacturers, suppliers, factory, customized, cheap, low price, free sample, cow rfid ear tag, Dog microchip implant, pig rfid ear tag, sheep rfid ear tag, Implantable Microchip Chip Glass Tag, sheep ear tag
You Might Also Like
Send Inquiry