Syntek Plastic Mifare Wristbands for Hospital, Campus and Access Control

Syntek Plastic Mifare Wristbands for Hospital, Campus and Access Control

Chip:MIfare Classic 1K
Frequency:13.56Mhz
Diameter:45mm
Product name:Plastic Mifare Wristbands
Send Inquiry
Chat Now

Reader-Compatible MIFARE 1K Wristbands for Existing Access and Payment Systems

 

One wrist-worn credential for entry, payment and attendance

 

If your site already issues MIFARE Classic 1K cards, this plastic Mifare wristband slots straight into the same system. It runs on 13.56 MHz under ISO14443A, so door controllers, locker locks, canteen terminals and attendance readers recognise it without new hardware or software changes.

 

What changes is the form factor. A card gets lost in a pocket or left in a changing room; a wristband stays on the person. The sealed plastic body is waterproof and shockproof, tolerates heat up to 75 °C, and is soft enough to wear for a full shift, a hospital stay or a day at the pool.

 

That makes these plastic RFID wristbands a practical choice for closed-loop ID programmes in wards, schools, factories, correctional units and leisure centres, where one credential handles entry, payment and attendance.

MIFARE Classic 1K plastic wristband in assorted colours for ID systems

Get a Syntek Mifare Wristband Quote

Plastic Mifare Wristbands Technical Specifications

 

Parameter Specification
Material Soft, elastic plastic
Chip MIFARE Classic 1K
Working frequency 13.56 MHz
RF standard ISO14443A
Memory 1K
Diameter 45 mm
Operating distance 2 to 5 cm (depends on reader)
Working life Over 100,000 read/write cycles
Working mode Passive, no battery
Operating temperature -20 °C to 75 °C
Storage temperature -25 °C to 80 °C
Surface options Silk screen, laser engraving, colour filling, glue embossing, fluorescent print, numbering/coding
Colour and logo Made to order
Packing 100 pcs/bag, 1,000 pcs/carton, carton 52 × 26 × 33 cm, gross weight 16 kg

Why Facilities Choose Our Wholesale Mifare Wristbands for Bulk Rollouts

 

Three properties decide whether a wristband programme runs smoothly after launch. This is how the band performs on each.

No reader replacement

The chip is MIFARE Classic 1K on ISO14443A, the technology most 13.56 MHz access and payment platforms already use. Your IT team enrols each Mifare wristband into the existing database alongside current cards, so a pilot batch can go live the day it arrives.

 

Reads only when presented

The 2 to 5 cm operating distance means the wearer has to bring the wrist to the reader. At locker banks, canteen tills and medication carts, the next person in line is never charged or logged by mistake, which cuts disputes at the front desk.

 

Years of daily use

Battery-free and rated for more than 100,000 read/write cycles from -20 °C to 75 °C. At 50 taps a day that is over five years of service per band, and reusable plastic bands cost less per user than reordering cards or disposables.

 

 

Not sure it will read on your system? Send us your reader or lock model and we will ship a free stock sample to test on site.

Request a Free Syntek Sample 

How We Build Each Plastic RFID Wristband for Continuous Wear

 
Elastic plastic RFID wristband with sealed MIFARE 1K chip

Sealed against water and impact

The chip and antenna are fully enclosed inside the plastic body. Patients can shower, swimmers can stay in the water and kitchen staff can wash their hands without taking the band off, so the ID stays where your process needs it.

 

Elastic fit with no clasp. The plastic band stretches over the hand and returns to shape, with no buckle to break or open. At 45 mm in diameter it sits close to the wrist, which suits long-term wear such as patient and infant identification.

 

Markings that stay readable.

  • Laser engraving and coding: permanent serial or UID numbers that do not wash off the plastic, so the number on the wrist matches the record in your system.
  • Silk screen and colour filling: logos and colour codes for wards, zones or membership tiers.
  • Glue embossing: a raised logo for member and VIP bands.
  • Fluorescent print: easy to spot in dim saunas, clubs and night shifts.

Project-Ready Mifare RFID Wristbands for Hospitals, Prisons and Campuses

Hospital patient and infant ID

Patient identification, childbirth and newborn matching. Because the band survives bathing, nurses scan the same ID at every medication round and transfer.

Prisons and guardianship care

Inmate and resident management. With no buckle to tamper with and a unique UID per wearer, each band links one person to one record.

Campus all-in-one card systems

Canteen payment, attendance and building access on one credential. Schools and factories already on MIFARE 1K add Mifare RFID wristbands next to their cards.

Pools, saunas and wash centres

Locker access and cashless spending in wet, warm areas. Plastic bands are collected at exit, wiped and reissued instead of being reordered.

Entertainment venues

Member entry, prepaid credit and staff access for clubs and leisure venues, with fluorescent print for low-light areas.

Airport and parcel tracking

The loop shape slips over bag handles and straps, giving parcels and luggage a reusable RFID tag.

 

Comparing This Band With Our Other MIFARE 1K Wristband Options

 

Still choosing a construction? Here is how this model sits within our RFID wristband range.

Model Material Chip Best fit
Plastic Mifare Wristband (this page) Soft elastic plastic, 45 mm MIFARE Classic 1K Hospitals, campuses, correctional and guardianship facilities, pools
1K Silicone Wristband Silicone MIFARE Classic 1K Events, gyms, resorts and cashless festivals
Sauna RFID Wristband ABS, 65 mm F08 Saunas and high-humidity spa areas
PVC RFID Wristbands PVC NTAG213, MIFARE 1K Hospitals, hotels and indoor events, snap or one-time closure

 

Custom Plastic Mifare Wristbands with OEM Printing, Numbering and Encoding

Bands that arrive ready to issue

 

Most of our buyers are system integrators, distributors and facility operators who need RFID wristbands that arrive ready to issue. Send your reader model, artwork and numbering plan, and we quote against that exact spec. Artwork can be PDF, AI or high-resolution JPG. See our OEM and ODM service for the full process.

 

  • Colour matching: band colours made to your request, including Pantone references.
  • Your logo: by silk screen, colour fill, embossing, laser or fluorescent print.
  • Sequential numbers, QR codes and barcodes: printed or laser-marked to match your records.
  • Chip encoding and UID lists: every chip is read and the UID list is delivered as a data file before shipment, so your team imports records instead of scanning bands one by one.
  • Custom samples: shipped 7 to 10 working days after artwork approval, so you can test on site before committing to volume.

Send Your Artwork to Syntek

Automated RFID production line in the Syntek wristband factory

Inside the Syntek Mifare Wristband Factory That Runs Your Bulk Orders

 

Syntek has owned its plastic injection moulding line since 2010 and its chip bonding line since 2011. Mould making, copper coil winding and silk-screen printing run in the same plant, so the chip, band and print on your order are never subcontracted.

 

Clean production workshop at the Syntek RFID factory

One plant, full process

Moulding, chip bonding, coil winding and printing run on our own lines. When you adjust a colour or a numbering range, the change happens here, not at a subcontractor.

RFID chip processing equipment on the Syntek production floor

Capacity for programme volumes

Five production lines and more than 200 staff in a 3,600 m² facility move standard orders into production within 5 to 7 working days.

Operator assembling RFID products on a Syntek production line

Export since 2012

Annual export sales above USD 3 million, shipped to buyers across Europe, North America, Russia, South Asia and the Middle East.

Factory-Tested MIFARE 1K Wristbands Backed by ISO 9001 Quality Control

Quality inspection of RFID wristbands at the Syntek factory

 

Two checkpoints on every order

Every batch of plastic wristbands is 100% checked before it leaves the line. A dedicated quality inspection department runs inline testing during production, and every order follows the same two checkpoints.

 

  • Before production: a pre-production sample is made for your approval.
  • Before shipment: a final inspection confirms the goods match the approved sample.

 

Syntek holds ISO 9001, CE and ICAR certification, giving your procurement team the documents most supplier approvals ask for.

 

Syntek ISO 9001 certificate
ISO 9001
Syntek CE certificate
CE

Bulk Order RFID Wristband Packaging and Express Shipping

Packed for easy distribution on arrival

 

Mifare wristbands ship packed 100 per bag and 1,000 per carton (52 × 26 × 33 cm, 16 kg gross). The 100-piece bags make it easy to split stock by ward, department or site without recounting.

 

A 10,000-piece order fills 10 cartons, roughly 160 kg and 0.45 m³. Each carton's actual weight is higher than its volumetric weight, so express freight is billed on actual weight and air quotes stay predictable.

 

DHL, FedEx and UPS deliver in 4 to 7 days, and we send tracking as soon as the goods leave.

Packing area for bulk RFID wristband orders

Mifare Wristband MOQ, Sampling and Lead Times for Wholesale Orders

 

Most orders reach you within about half a month of confirmation. MOQ and unit price for wholesale MIFARE 1K wristbands depend on volume, printing method and encoding, so we confirm the MOQ and a freight-inclusive price in one quote.

 

Stage Timing
Stock sample Free, you cover the courier
Custom sample 7 to 10 working days after artwork approval
Mass production 5 to 7 working days
Express delivery (DHL, FedEx, UPS) 4 to 7 days

 

How a Syntek Wristband Order Runs

01.

Share requirements

Quantity, reader model, colours, logo and numbering.

02.

Quote and recommendation

A detailed price with the right band and finish for your system.

03.

Sample and approval

We produce a sample to your spec; you test it and sign off.

04.

Production and delivery

Production starts on deposit, the balance is paid before shipping, and we stay on hand for after-sales support.

 

Syntek, Your Factory-Direct Mifare Wristband Manufacturer and Supplier

 

A national high-tech RFID manufacturer since 2006

Syntek is a dedicated Mifare wristband manufacturer and OEM supplier. When you buy from us you deal with the factory itself, with ISO 9001, CE and ICAR certified production and export experience in five regions. Learn more about the Syntek factory.

One factory, one contact

Chip, band, print and encoding are handled by the same team, with no trading-company margin in your unit price.

Support before and after delivery

UID lists and numbering are prepared before shipment, and our sales office in Shenzhen stays on hand for after-sales questions.

Overseas buyers visiting the Syntek RFID wristband supplier

2006

Founded

3,600 m²

Own factory

200+

Employees

USD 3M+

Annual export sales

 

Talk to a Syntek Wristband Specialist

Plastic Mifare Wristband Questions From Procurement Teams

Q: Will these wristbands work with our current MIFARE 1K readers and locks?

A: Yes, as long as your readers support MIFARE Classic 1K on ISO14443A at 13.56 MHz. Syntek, as a Mifare wristband manufacturer, will send a free stock sample so you can confirm the read on your own hardware before you order.

Q: Can you pre-number the bands and give us the UID list?

A: Yes. Serial numbers or UIDs can be laser-marked on each band, and the complete UID list is sent as a data file before shipment. Syntek, as an RFID wristband supplier with in-house encoding, matches the printed number to the chip data so you can import records directly.

Q: How is the price for a bulk order calculated?

A: The unit price of bulk plastic RFID wristbands depends on quantity, printing method and encoding. Tell us those three things and your delivery country, and we return a price that already includes freight.

Q: How fast can a custom wholesale order be delivered?

A: Mass production takes 5 to 7 working days and express delivery takes 4 to 7 days, so most orders arrive within about half a month. Custom samples ship 7 to 10 working days after artwork approval.

Q: What are the payment terms?

A: Production starts once the deposit is received, and the balance is paid before shipment. We then send tracking details and stay available for after-sales support.

Q: How do you control quality on large orders?

A: Syntek makes a pre-production sample for approval before every mass run, tests inline during production and carries out a final inspection before shipment, with 100% QC on each batch. Production is ISO 9001 certified.

Request a Quote From Syntek, Your MIFARE 1K Wristband Factory

 

For an accurate price on the first reply, include:

  • Quantity and delivery country
  • Reader or lock model you use
  • Band colours and logo file
  • Numbering, QR code or UID list needs
  • Free stock samples are available. You only cover the courier.
 

Hot Tags: Syntek Plastic Mifare Wristbands for Hospital, Campus and Access Control, China, manufacturers, suppliers, factory, customized, cheap, low price, free sample

Send Inquiry